Connection Principle 1+
Model: 1+系列
Category: Key Components
Exhibitor: EM-TECHNIK EAST ASIA LTD.
Booth No: J330
Characteristic
1. The entire 1+ series connector design has only two parts, one is the connector body and the other is the pressure screw. The clamping ring and the pressure screw are an integral injection molding design that can directly lock the connector, so there is no need the clamping ring and there will be no other parts falling off.
2. The built-in connecting sleeve and the tube thread are an integral injection molding design that will not be damaged or deformed by external forces.
3. It is very simple to operate the 1+ series connector. You can complete the seal by just tightening it with your hands without any tools. This design reduces the assembly time. If necessary, you can also tighten the pressure screw with a wrench because there is no narrow gap or dead corner in the middle.
Other Products
-
Electrical fine control valve 5E
-
Ball Valve with Electrical Actuator 6R
-
Injector 7G
-
Ball Valve with Pneumatic Actuator 6D
-
Manual Ball Valve 6L
-
Connection Principle 1C
-
Connection Principle 2N
-
3K Series - PFA Quick Couplings
-
4Z Series - Flow meter for gases and liquids
Products you may be interested in
-
Limit Switch Box APL310N APL210N
-
SMC EP Positioner IP8100
-
Control Valve DDD TS600L E/P Positioner Input/Output 4~20mA
-
Thermax 5L、8L、10L ( TMCHallcrest )
-
1LX-7003-ET 1LX-7001-ET Limit Switch
-
Pneumatic Butterfly Valve Air Toque DDD CO. Professional Agent Pneumatic Plastic Butterfly Valve , Optional Made by ITALY SOLDO Rotork Display Type Micro Switch Limit Switch Box
-
VCX-7003-ET VCX-7001-ET Limit Switch
-
PVC Butterfly Valve with KLS10 Limit Switch Box Valve Position Monitor
-
MGW250 Drive Wheel
-
HKC Limit Switch Box APL410N
-
TS600R Pneumatic Actuated Ball Valve All STS316
-
TS600R Pneumatic Actuated Ball Valve All STS316
-
HMG High Integration Hub Motor
-
Valve Position Monitor APL-210N APL-220N
-
Pneumatic Actuated Ball Valve (PVC Valve)
-
YT-1000L E/P Positioner
-
DC Sensorless BLDC Drive
-
APL-2N APL-3N APL-4N APL-5N APL-7N APL-8N APL-9N Valve Position Monitor
-
APL-210N Limit Switch Box / Valve Position Monitor
-
LSB Valve Position Monitor
-
TS600 DDD E/P Positioner IN/Out 4~20mA with valve Position monitor and Limit Switches
-
Small Vehicle BLDC Drive
-
Korean Tissin OEM produces DDD brand. Taiwan general agent DDD CO. Valve Industry DDD brand TS600 TS800 TS900 TS300 pneumatic proportional control valve peripheral accessories
-
Valve Position Indicator ALS30
-
DC Servo/BLDC Drive
Highest Rated Products
-
Multi-Axis Robot
-
Stator Slot Cell Inserter - For Drone / Quadruped Robot Motor Production Line
-
High-IP Fixed-mount barcode scanner
-
Kuebler(Kübler) ·Condition Monitoring Sensor CMSVT38
-
Eliwell Electronic controllers compatible with flammable refrigerant gases
-
ATEX Couplings & Torque Limiters
-
Gear Couplings
-
Line Shaft Couplings
-
Customized Couplings
-
Disc Pack Couplings
-
Bellows Couplings
-
Elastomer Couplings
-
Level Detection
-
DeCaIonTM eliminating scale, preventing corrosion and bio-fouling automatically Cooling water treatment system
-
Ultrasonic Camera
-
Leakshooter1000 Ultrasonic leak detector Camera
-
Laser Alignment System
-
Vibration Accelerometer
-
Vibration Analyzer
-
SMC EP Positioner IP8100
-
Smart transmitters for Indigo probes
-
SMC IP8100-031-DH Pneumatic Proportional Control Valve SMC Explosion-proof Positioner Made in Japan Taiwan Explosion-proof TS Mark (DDD CO. Taiwan)
-
Automatic diaphragm control valve IP8000-031 IW215 Pneumatic diaphragm control valve Proportional control valve Pneumatic flow control valve (DDD CO. Taiwan)
-
YT-1000L E/P Positioner
-
YT-1000RDM131S00 YT-1000R E/P Positioner
-
For field sampling and calibration, data analysis and diagnostics ( VAISALA )
-
GMP80P Portable carbon dioxide probe with pump sampling ( VAISALA )
-
Handheld probe for dew point and temperature ( VAISALA )
-
Handheld probe for humidity and temperature ( VAISALA )
-
VaiNet Wireless Temperature Data Logger ( VAISALA )
